Street Light Poles

Approx. Rs 1,25,000 / PieceGet Latest Price

“TRANSPOWER”  Make 12.5 M High Mast in One Sections suitable for 47 m/sec

Wind speed (as per IS 875), with raising lowering system comprising,

Head frame, luminaries carriage suitable to install 6 Nos luminaries in 

Symmetrical arrangement, double drum winch, 5 m diameter SS Wire Rope,

Trailing Cable, connector, integral power tool motor, manual handle,

Junction box, lightning finial. (Top - 150 mm, Bottom - 360 mm ) thickness 3/3 mm Including Aviation Lights. Lamps and its control gear boxes (PCD - 445 mm )

Supply of Foundation Bolts manufactured from special steel along with nuts, washers, anchor plates and templates.

Supply of outdoor stand mounted feeder pillar with 32 Amp TPN MCB incomer, Single dial timer etc

Approx. Rs 95,000 / UnitGet Latest Price

transpower make high mast manufacturer
high mast motorised type rs. 95,000
feeder pilar 32amp rs. 12500/
foundation bolt 24/8/750 rs. 3500
single dom aviation light fitting rs. 3,000/

Additional Information:

• Item Code: 7308.90.70
• Production Capacity: 10
• Delivery Time: WITH IN 4 TO 6 WEEKS
• Packaging Details: NOT

Approx. Rs 5,000 / PieceGet Latest Price

M.S. Steel Tubular Pole Swaged Welded confirming to IS: 2713 / 1980 manufactured from Prime Quality E. R. W. Black Tubes/Pipes conforming to   IS : 1239 shall be swaged by means of Hydraulic swaging Machine. This swaging Process is basically to retain the Physical/Chemical properties of the Raw Material and to get the uniform Result. The Poles shall be cut Round square and shall be reasonably straight, Smooth and cylindrical, The upper edge of each Joint shall be welded by means of electrodes of ISI make only.  The Poles shall then be painted with two coats of Black Bituminous till the planting Depth, The remaining portion shall be painted with two coats of Red Oxide Primer Externally only.

Additional Information:

• Production Capacity: 500
• Delivery Time: with in 4 to 6 weeks
• Packaging Details: not required

Approx. Rs 6,500 / PieceGet Latest Price

“TRANSPOWER” MAKE 6 Mtr. G.I Octagonal Pole high Hot-Dip Galvanized Octagonal Pole EN10025_2_2005_S355JO_CL-1 Hot Rolled Sheet with Base Plate 2026 Wind load speed shall be 180 Km for 3 Sec fabricated from HT steel conforming to BS EN 10025, S-355 JO with Bottom dia.130 mm A/F, Top dia.70 mm A/F, Thickness-3 mm & Base Plate 220 X 220 X 12 mm thick with inbuilt junction box with 4 Way Connector without MCB.

Additional Information:

• Pay Mode Terms: Other
• Port of Dispatch: depend on avaliability
• Production Capacity: 100 NOS
• Delivery Time: Depend on Order quantity of Pole
• Packaging Details: not required

Approx. Rs 5,000 / PieceGet Latest Price

“TRANSPOWER” MAKE 3Mtr. to 12Mtr G.I Octagonal Pole high Hot-Dip Galvanized Octagonal Pole EN10025_2_2005_S355JO_CL-1 Hot Rolled Sheet with Base Plate 2026 Wind load speed shall be 180 Km for 3 Sec fabricated from HT steel conforming to BS EN 10025, S-355 JO with Bottom dia.130 mm A/F, Top dia.70 mm A/F, Thickness-3 mm & Base Plate 200 X 200 X 12 mm thick with inbuilt junction box with 4 Way Connector without MCB.

Including Single Arm Bracket 1 Mtr Cap Type Bracket and

Foundation Bolt 4  X 16 X 450 With 1 No TEMPLATE

Additional Information:

• Production Capacity: AS PER REQUIREMENT
• Delivery Time: WITH IN 2 WEEKS
• Packaging Details: not required

Approx. Rs 6,500 / PieceGet Latest Price

 TRANSPOWER MAKE 5 Mtr.G.I Octagonal Pole high Hot-Dip Galvanised octagonal pole fabricated from HT steel conforming to BS EN 10025, S-355 JO with Bottom dia 130mm A/F, Top dia.70mm A/F, Thickness-3mm & Base Plate 200X 200 X 12mm thick with inbuilt junction box. 

Additional Information:

• Item Code: 730890
• Production Capacity: As per requirement
• Delivery Time: WITH IN 2 WEEKS
• Packaging Details: not required

Approx. Rs 12,500 / PieceGet Latest Price

“TRANSPOWER” Make 7 Mtr.G.I Octagonal Pole high Hot-Dip Galvanized octagonal pole fabricated from HT steel conforming to BS EN 10025, S-355 JO with Bottom dia.130mm A/F, Top dia.70 mm A/F, Thickness-3mm & Base Plate 200 X 200 X 12mm thick with inbuilt Non Flame Proof Junction Box with 4 way connector with 32 Amps MCB L&T make.

(Galvanized Thickness 100 to 125 Micron)

Additional Information:

• Production Capacity: 50
• Delivery Time: DEPENDY ON QUANTITY
• Packaging Details: MOSTLY POLE NOT REQUIRED PACKING

Approx. Rs 7,000 / PieceGet Latest Price

Additional Information:

• Item Code: 73089070
• Production Capacity: As per tequirement
• Delivery Time: DEPEND ON QUANTITY
• Packaging Details: no required

Approx. Rs 4,500 / PieceGet Latest Price

M.S. Steel Tubular Pole Swaged Welded confirming to IS: 2713 / 1980 manufactured from Prime Quality E. R. W. Black Tubes/Pipes conforming to   IS : 1239 shall be swaged by means of Hydraulic swaging Machine. This swaging Process is basically to retain the Physical/Chemical properties of the Raw Material and to get the uniform Result. The Poles shall be cut Round square and shall be reasonably straight, Smooth and cylindrical, The upper edge of each Joint shall be welded by means of electrodes of ISI make only.  The Poles shall then be painted with two coats of Black Bituminous till the planting Depth, The remaining portion shall be painted with two coats of Red Oxide Primer Externally only.

Approx. Rs 5,250 / PieceGet Latest Price

Additional Information:

• Production Capacity: 50
• Delivery Time: 2 to 3 weeks

Approx. Rs 5,750 / PieceGet Latest Price

Additional Information:

• Production Capacity: 500
• Delivery Time: with in 4 to 6 weeks